<td id="ocyf7"><strike id="ocyf7"></strike></td>

    ESD5500E Electronic Speed Control Generator Governor

    Product Details
    Brand ZOZHI
    Serial Number ESD5500E
    Country of Origin Fujian China
    Certificate ISO, CE
    Payment & Shipping Terms
    Price Quote 3000-10000
    Minimum Order 1pcs
    Average Delivery Time 30days
    Payment Method TT, western union
    Package Details Carton
    Ability to Supply 200pcs per month

    ESD5500E Electronic Speed Control Generator Governor


    ESD5500E Electronic Speed Control  Description

    ESD5500E is based on ESD5111. It has newly added starting fuel quantity control and smooth and slow starting process control. These new features can solve the black smoke phenomenon caused by rapid refueling during the start of the engine, which greatly improves the engine life. . It is a very rich and perfect model at present and is widely used in new generators.

    The ESD5500E generator electronic governor is very sturdy and can be placed in a control cabinet or engine mounting box with other special control equipment. If water, mist or condensate may come in contact with the controller, it should be installed fixedly. This will allow fluid to drain from the speed control unit.

     The 5500E Series speed control unit is an all-electronic device designed to control engine speed with fast and precise response transient load changes.

    *ESD5520E is designed for the EFC series.

    *Isochronous Operation/Steady Stability---- +/-0.25% or better

    *Supply----12 or 24 VDC Battery Systems(transient&reverse voltage protected)

    *Power Consumption----50 ma continuous plus actuator current

    *Maximum Actuator Current at 25celsius (77celsius F)----10 Amps continuous

     Input  Supply  12 or 24 VDC Battery System (Transient and Reverse Voltage)
     Polarity  Negative Ground (Case Isolated)
     Power Consumption  50 ma continuous plus actuator current
     Actuator Current Range @ 25   Min.2.5 Amps; Max. 10Amps continuous
     Deg. C - (Inductive Load)
     Speed Sensor Signal  0.5-120 Volts RMS
     Performance  Isochronous Operation/Steady   ±0.25% or better
     State Stability
     Speed Range/Governor  1K to 7.5K Hz continuous
     Speed Drift with Temperature  ±1 Max
     Idle Adjust CW  60% of set speed
     Idle Adjust CCW  Less than 1200 Hz.
     Droop Range  1-5% regulation
     Droop Adj. Max. (K-L Jumpered)  400 Hz., ±75Hz. Per 1.0A change
     Droop Adj. Min. (K-L Jumpered)  15Hz., ±6Hz. Per 1.0A change
     Speed Trim Range  ±200 Hz
     Remote Variable Speed Range  500 - 7.5 Hz. Or any part thereof
     Terminal Sensitivity J  100 Hz., ± 15Hz / Volt @ 5.0 K Impedance
     Terminal Sensitivity L  735 Hz., ±60 Hz / Volt @ 65 K Impedance
     Terminal Sensitivity N  148 Hz., ±10 Hz / Volt @ 1 Meg. Impedance
     Terminal Sensitivity P  10 VDC Supply @ 20 ma Max
     Environmental  Ambient Operating Temperature   -40 to +85 Deg. C
     Relative Humidity  Up to 95%
     All Surface Finishes  Fungus Proof and Corrosion Resistant
     Reliability  Vibration  1G at 20 to 100 Hz.
     Testing  100% Functionally Tested
     Physical   Dimensions  See outline (FIGURE 1)
     Weigh1  1.2 lbs.(545 grams)
     Mounting  Any position, Vertical Preferred


    ESD5500E Electronic Speed Control  Advantage


    ESD5500 Adopting Best Component Only
    ZOZHI never compromise the quality, focus on details
    Each component is strictly tested before assembling.
    Using importing for the main parts.
    100% exactly replaced and match
    During over 10 years improving, the 5500E can 100% replaced the original one and perfect match for most of the engine
    ESD5500  Advanced equipment
    The factory used the advanced equipment to produce, assembly and inspect the control governor. To ensure the high accuracy


    Get in Touch with us

    Fill out more information, We will get back to you within 24 hours.

    Factory Address




    Contact Us

    Business Phone : 0593-6532656

    Work Time :08:00-18:00(Beijing time)

    contact us